UNIVERSITY OF CALIFORNIA, DAVIS

Department of Electrical and Computer Engineering

EEC213

Data-Conversion Techniques and Circuits

Course Overview

Spring 2006
Web Page:
http://www.ece.ucdavis.edu/courses/S06/EEC213/

Course Time and Location:
115 Wellman
Tu, Th 3:10-4:30 pm

Instructor:
Professor Stephen Lewis
Office: 2035 Kemper Hall, Phone: 530-752-0458
Office Hours: Monday 4:10-5:00pm and Friday 11:00-11:50am
Please contact me in person (in office hours or after class) instead of by email.

Required Text:
Principles of Data Conversion System Design, Razavi, IEEE Press, 1995.

Reference Texts:
  1. Delta-Sigma Data Converters Theory, Design and Simulation, Edited by Norsworthy, Schreier, and Temes, 1997.
  2. Integrated Analog-to-Digital and Digital-to-Analog Converters, van de Plassche, 1994.
  3. Analysis and Design of Analog Integrated Circuits, 4th edition, Gray, Hurst, Lewis, and Meyer, 2001.
  4. Oversampling Delta-Sigma Data Converters, Edited by Candy and Temes, 1992.
  5. Analog MOS Integrated Circuits-II, Edited by Gray, Wooley, and Brodersen, 1989.
  6. Analog MOS Integrated Circuits for Signal Processing, Gregorian and Temes, 1986.
  7. Analog-Digital Conversion Handbook, by Engineers at Analog Devices, 1986.
  8. Bipolar and MOS Analog Integrated Circuit Design, Grebene, 1984.

Prerequisites: EEC210

Objectives:
After taking this course, a student should understand:
  1. A/D and D/A building blocks (passive components and comparators),
  2. sample-and-hold circuits,
  3. digital-to-analog-converter characteristics, error sources, architectures, correction techniques, and limitations, and
  4. analog-to-digital-converter characteristics, error sources, architectures, correction techniques, and limitations.




Grading:
The grades will be based on four quizzes, one design project, one exam, and one oral presenation. The quizzes will be closed book and closed notes and will be held on 4/11, 4/25, 5/9, and 5/23. The exam will be open book and open notes and will be held during the last class period (Tues. 6/6/06). Also, each student is required to give an oral summary of an instructor-approved journal article on a data-conversion topic during the final-exam time slot (Sat. 6/10 from 1:30 pm - 3:30 pm). Finally, there will be about five homework assignments, but they will not be collected or graded. The weighting used for the final course grade will be:

         Quizzes        20%
         Project        20%
         Paper Review   20%
         Exam           40%
Reading Assignments:
The reading assignments refer to the books listed above and use the following abbreviations:
  1. Razavi = The Razavi Book (required for EEC213)
  2. van de Plassche = The van de Plassche Book
  3. GHL&M = The Gray, Hurst, Lewis, and Meyer Text (required for EEC210)
  4. GWB = The Gray, Wooley, and Brodersen Book
  5. G&T = The Gregorian and Temes Text
  6. Grebene = The Grebene Book

TopicReading
Passive Components GHL&M pp. 144-148, Grebene pp. 135-147, 154-159
G&T pp. 86-93, 117, 474-483
GWB pp. 119-127 (McCreary), 128-135 (Shyu)
GWB pp. 167-186 (Allstot)
Sample-and-Hold Circuits Razavi Ch 2 and 3, van de Plassche Ch. 8
GWB pp. 90-95 (Yen), 146-152 (Wilson)
GWB pp. 153-157 (Shieh)
Comparators Razavi Sec. 7.2 and 8.1, van de Plassche Ch. 5
GWB pp. 99-106 (Allstot), 107-109 (Soo)
G&T pp. 425-437
Digital-to-Analog Converters Razavi Ch. 4 and 5, van de Plassche Ch. 6
GWB pp. 370-375 (Miki), Grebene Ch. 14
Analog-to-Digital Converters Razavi Ch. 6 and Sec. 8.3 and 8.4
van de Plassche Ch. 7, 10, and 11
GWB pp. 283-350 (10 papers), Grebene Ch. 15