ECE Software

Back to List of Software Maintained by the ECE Department...

SWITCAP2 Overview

SWITCAP2 is a general simulation program for analyzing linear switched-capacitor networks and mixed switched-capacitor/digital networks.

SWITCAP2 currently (2/8/08) runs on *one* research HP-UX workstation named switcap.ece. The command to run SWITCAP2 is sw2. There is no special setup required for sw2 on this workstation, as the sw2 binary is on the default PATH.


Other Information

  • The SWITCAP2 Manual: [PDF] [PS]