EEC222 - RF IC Design3 units - Winter Quarter
Lecture: 3 hours
Prerequisite: courses 132C and 210
Grading: Letter; three projects (60%), final exam (40%).
Radio frequency (RF) solid-state devices, RF device modeling and design rules; nonlinear RF circuit design techniques; use of nonlinear computer-aided (CAD) tools; RF power amplifier design.
Students will gain the fundamentals of RF IC design and be familiarized with RF IC design rules and nonlinear computer-aided design tools.
Expanded Course Description:
- Overview of high-frequency integrated circuits
- On-chip passive devices: resistors, capacitors and inductors
- High-frequency/high-speed device physics and figures of merit
- Solid-state device modeling and design rules
- Review of small-signal model and extraction techniques
- Large-signal model
- Examples of nonlinear models
- Examples of RF IC design rules and processes
- Nonlinear RF circuit design analysis
- Harmonic balance analysis
- Large-signal, single-tone problems
- Solution algorithms
- Selecting the number of harmonics and time samples
- Generalized harmonic balance analysis
- Circuit envelop analysis
- RF power amplifier design
- Classes of power amplifiers
- Review of linear power amplifier design techniques
- Gain match and power match, matching circuits for power amplifiers
- Introduction to load-pull measurements
- Conventional high-efficiency amplifiers
- Nonlinear effects in RF power amplifiers
- Efficiency enhancements and linearization techniques
Stephen A. Maas, Nonlinear Microwave Circuits, IEEE Press, New York, 1997.
Steve C. Cripps, RF Power Amplifiers for Wireless Communications, Artech House, Massachusetts, 1999.
Thomas H. Lee, The Design of CMOS Radio-Frequency Integrated Circuits, Cambridge University Press, United Kingdom, 1998.
Instructor: Anh-Vu Pham
This graduate course covers practical RF circuit-level implementations of functional blocks for RF front-ends, especially transmitters. It exposes the students to RF IC design, nonlinear design techniques, RF power amplifier design, and the transmitter side of a RF front-end. Course 228 and 211 cover noise analysis and some complementary RF circuits such as low-noise amplifiers and receivers without overlap.
Last revised: 3/04